首页 >>机器生产线 >>C/Z/U檀条机

C89 Automatic Light Steel House Purlin Roll Forming Machine

C89 Automatic Light Steel House Purlin Roll Forming Machine


Features

Big Will Industrial Limited  company is the outstanding factory that for working on light steel house purlin roll forming machine. This roll forming machine is special design for light steel house company, it can save much more for preparing steel house machining list, Our light steel house purlin roll forming machine can give out material list and arrange purlin producing task by the software system itself automatically.


Light Steel house’s advantage

 

1)Light steel structure’s technical and product is very mature, can be produced batch and batch.

 

2)Long usage life. Normally, it can be used about 275 year (this date from North America).

 

3)Light steel contruction house is more better for anti-earthquake, the house won’t fall down until the earthquake lower than 9th class.

 

4)Can bear strong wind well: our light steel construction can bear 12 class strong wind (1.5KN/㎡)

 

5)Light steel house is good for enviroment, it can be moved and the material can be reclycled.

 

6) Light steel house structure itself weight is ligt, only about 1/4 compare to concrecte structure, so the foundation is more easy to build.

 

7) Compare to wood house, light steel structure house is good for anti white ant.

 

8)The whouse house is stable and low cost.

 

9)Light steel structure inside space cover is more bigger than concrete building

 

10) Light steel building’s fitting part is easy for batch producing in factory

 

11)Light steel house can be finished in more short days to keep around enviroment in low noise

 

12) Light steel house is good for keep enviorment clean and less waste

 

13) The concrete building need about 40years drying completely, so the house will be wet and not good for human health. Also the light steel wall only need a little place, so it can save land space for building wall.

 

14) All the material for light steel house are machined in factory batch by batch, the accuracy is more better to ensure the house quality,other traditional construction type have no idea to reach like this.

 

2. Machining raw material parameter

 

Prameter

Description

Purlin Size

C89x38x10

Suitable material

G550 high tension grade plate/zinc coated plate/aluminum-zinc coated plate

Tension grade

350MPa-550MPa(G450 middle-carbon steel is more better)

Material thickness

0.7-1.2mm

Material width

174mm

galvanzied-steel-plate.jpg

 

3. Producing line parameter

 

 

3.1 Uncoiler

 

      Hydraulic constrol system conrol release or clamp steel coil, auto-stop device, frequency inverter driving

Coil Width: 50-500mm

Suitable for coil inside hole diameter: 450-530mm

Coil outer diameter:≤1300mm

Capacity: 3T

Main motor: 1.5Kw

Hydraulic motor: 1.5Kw

 steel-house-forming-machine.jpg

 

3.2 Punching device (6sets)

 

Description (die material : SKD11)

 Qty

50*12mm punching die(for cutting side rolling material)

 1 set

beehive hole die

1 set

Ф13mm installing hole(for foundation bolt

1 set

60*30mm punching die (for cable used hole)

1 set

89*50 squre hole die ( for cutting plate web)

1 set

45°angle cutting die

1 set

plate web shrink die

1 set

 

purlin-sample.jpg

 

3.3 Roll forming machine (1 set)

 

            Transimit type: motor+gear and chain sprocket

Main motor: 5.5Kw(servo-motor)

Roller material: SKD11(heat treament and surface polishing)

 Main shaft material: 40Cr(tempering treatment)

Forming speed: 30m/min

Producing capacity: 80-100m2 /day

Forming method: cold rolling rollforming

Forming size: C89*38*10

 steel-house-material-automatic producing line.jpg

automatic-tent-purlin-roll-forming machine.jpg

 

3.5 Hydraulic station (1 set)

 

Hydralic motor power: 5.5KW

 Hydraulic parts brand: Japanese yuken

Oil tank volum: 120L

 

3.6  Design software (1 set)

 

Vertex systems (Australian brand)

Automatic build 3D mould

Automatic create 3D purlin structure drawing, 3D decoration effective drawing

Automatic calculate  structure material list

Can transmit kinds of format drawing or photos

Automatic transform machining data

Needn’t update, can be worked forever

steel-house-design.jpg

house-frame-stype.jpg

 

3.7 Control system (1 set)

 

Long distance pass on or USB input machine&producing documents

IPC computer on set (or notebook computer, operating system: windows7

PLC control system

Upper software

Control punching hole postion

Control cutting position

Control producing batch

Control producing piece

Real time monitoring


 software-on-computer.jpg


3.8 Inkjet printer

 

Automatic print letter, date on final product

 purlin-with-producing-date.jpg

 

     3.9 Project sample

house-frame-forming-machine.jpg

house-frame-sample.jpg

steel-house-surpport-frame.jpg

 

Chat with us now!

Whatsapp/wechat: 0086 15959271231

QQ: 1404805737

Skype: iwrannil

Email: sophie@cnrollforming.com

           iwranni12@hotmail.com